Safari Tent B Series Installation Guide (Step-by-Step)

This guide provides a comprehensive, step-by-step process for installing the Safari Tent B Series, based on the provided video.

Step 1: Unpack and Verify Components

• Before you begin, carefully unpack all the materials from their packaging [00:05].

• Check all parts against the provided list. This includes:

  • Wooden parts: Beams, poles, rafters, and rails [00:08]. The video demonstrates the position of these parts on the assembled frame [00:12].

  • Metal parts: Galvanized iron pipes, base brackets, ridge connectors, and eave connectors [00:25].

• Gather all necessary tools as shown in the video, including ladders, drawings, screws, ropes, strips, a tape measure, and an electric screwdriver [00:30].

Step 2: Position and Secure the Base

• Using the provided drawing, mark the exact position for the tent's base on the ground [00:37].

• Install and securely fasten the base to the marked position [00:43].

Step 3: Assemble and Erect the Frames

• Assemble the main frames (labeled A, B, C, and D in the drawing) on the ground first [00:54].

• Use flat-head self-tapping pointed tail screws (M5*35) to fix the connectors, base, and poles of each frame together [01:28].

• Erect the pre-assembled frames and attach them to the base in the correct sequence (D, C, B, then A) as indicated in your drawing [01:47].

• Install the secondary beams and ridge beams to connect each frame, securing them with flat-head self-tapping screws [02:00].

• Follow the drawing to install the remaining beams and rails, including the ridge beams and braces, ensuring all are securely fastened [02:15].

Step 4: Install the Inner Fabric

• Insert the galvanized iron pipes into the sewn-in pockets on the outside of the inner tent fabric [02:23].

• Carefully drape the inner fabric over the assembled frame [02:46].

• Use the clip buckles and straps on the inner tent to fasten the fabric to the rafters, beams, and ridge beams [02:57].

• Secure the inner fabric to the floor using aluminum trimming strips and screws [03:13].

Step 5: Install the Roof Fabric

• Place the roof fabric over the frame, taking care to align it correctly with the structure [03:22].

• Fix the fabric to the ridge beam and tail using flat-head self-drilling screws (M5*35) [03:29].

• Screw the eye screws into the floor, thread the ropes through them and the buckles on the roof fabric, and tighten the ropes to create a smooth, flat roof [04:03].